Angepinnt Prepar3D Update 4.1

    • P3Dv4-1

    Diese Seite verwendet Cookies. Durch die Nutzung unserer Seite erklären Sie sich damit einverstanden, dass wir Cookies setzen. Weitere Informationen

    • Prepar3D Update 4.1 im Anflug

      FlyAgi schrieb:

      das ist nicht das Datum für die Veröffentlichung des Updates:
      Genau, das ist der Grund warum ich anscheinend geschrieben habe, rein spekulativ. Der Text geht ja noch weiter.

      „What’s most interesting is the Reddit thread (link here), has now been deleted, whilst the Twitter post currently remains active. Why? Well, we think it has to do with the fact they may have accidentally revealed that version 4.1 of the simulator will be out very soon. Quoted from the Reddit post, they said “we just released v4.1, so we thought this would be a great time to answer any questions you might have”. I was quick enough to capture a screenshot of the thread before it was deleted. Also note that some of the comments question 4.1 as well.

      (Note: 4.1 is NOT released! We have just checked and it’s not available to download)

      However, if you then head to the account which posted this thread (u/LockheedMartin), you will notice they’ve posted a new thread, with the above quote now missing.

      We’re expecting that the release of version 4.1 is pretty close now and I’m guessing we’ll know for sure by Tuesday. Hopefully this means that beautiful looking A320 from FSLabs isn’t too far behind either.“
    • Ja und in dem Screenshot steht, dass auch Fragen zum kürzlich veröffentlichten 4.1 gestellt werden können. Ergo: wenn die Fragerunde am 26.9. stattfindet könnte das schon heißen, dass 4.1 davor zu haben sein wird (wäre logisch).
      Schade, dann gibt es ja wieder Argumente für FSLabs, den Bus weiterhin zu testen, anstatt ihn endlich mal zu releasen.

      mfg Kai
      Kai-Uwe Weiß, Mitglied im neuen FlightXPress Forum seit Sep 2007.
      Hardware: Gigabyte X79-UD3
      CPU: Sandy-Bridge E Core i7 3930k @4,3Ghz
      ASUS GTX 1080Ti
      24 GB RAM
      Windows 10 pro
      P3Dv4.1

      "We are jigsaw pieces aligned on the perimeter edge
      Interlocked through a missing Piece." Marillion
    • So, nach der gestrigen Reddit-Session ist es raus, Prepar3d 4.1 kommt am 10. Oktober 2017.

      Es wird u.a. Raindrops im VC geben. Die Sloped Runways und DX12, wie viele gemunkelt haben, noch nicht. Interessant finde ich das klare Statement zur "non-military-community" (das sind wir!) :D .
      Die Abschrift findet Ihr auf FSelite

      @Admins: legt doch schon mal eine 4.1 Kategorie an :D

      Dieser Beitrag wurde bereits 1 mal editiert, zuletzt von airlinetycoon ()

    • Hab ich schon Sonntag alles platt gemacht.

      Für die neue Installation geht bei mir wieder ein Tag flöten :kaffe:
      Hoffentlich läuft danach wieder alles wie vorher...
      Mein System :
      Intel Core i7 7700K 4,8 Ghz
      ASUS Maximus IX Hero | Intel Z270
      Asus Rog Strix Geforce GTX 1080Ti OC 11Gb
      32GB Corsair Vengeance LPX DDR4-3000
      2X 500gb SSD Samsung 850 evo
      Corsair H100i v2 Wasserkühlung
      Prepar3D V4 @ Windows 10
      X-Plane 11 @ Windows 10
    • Ich war gerade mit 4.0 Fertig und hatte die ersten Testflüge absolviert :threeeyes:
      Hardware:
      Intel Pentium i7 7700k auf 4200 PS WageKü
      Zotac Amp! Extreme 1080 Ti GTX 11GB
      16 GB G.Skill Trident RGB
      Gigabyte Z270 HD3
      Be Quiet! 600W Straight Power Gold
      2x Samsung 850 Evo SSD 250 GB
      2x Crucial 525 GB SSD
      2x 4TB USB 3.0 Ext. Center
      Windows 10 Prof.
      3x Samsung Curved 27", 1x LG 32"
    • airlinetycoon schrieb:

      Wow, darauf würde ich nie kommen. Lieber ein paar Tage warten bis Active Sky, ORBX usw. sicher laufen.
      Jeder wie er mag.
      Naja, hab momentan eh keine Zeit zum fliegen deswegen.
      Mein System :
      Intel Core i7 7700K 4,8 Ghz
      ASUS Maximus IX Hero | Intel Z270
      Asus Rog Strix Geforce GTX 1080Ti OC 11Gb
      32GB Corsair Vengeance LPX DDR4-3000
      2X 500gb SSD Samsung 850 evo
      Corsair H100i v2 Wasserkühlung
      Prepar3D V4 @ Windows 10
      X-Plane 11 @ Windows 10
    • Mika schrieb:

      habe alles platt gemacht ...
      Das hätte ich sowieso...
      Ich mag ne frische neue Installation, auch wenn ich weiß das es nicht nötig wäre.
      Ich persönlich fühl mich damit besser und der ganze Datenmüll im Laufe der Zeit ist somit auch mal weg ^^
      Mein System :
      Intel Core i7 7700K 4,8 Ghz
      ASUS Maximus IX Hero | Intel Z270
      Asus Rog Strix Geforce GTX 1080Ti OC 11Gb
      32GB Corsair Vengeance LPX DDR4-3000
      2X 500gb SSD Samsung 850 evo
      Corsair H100i v2 Wasserkühlung
      Prepar3D V4 @ Windows 10
      X-Plane 11 @ Windows 10
    • ChangeLog P3D v4.1 from AVSIM

      Release Notes
      The Prepar3D v4.1 release brings many exciting changes and enhancements to the platform.

      The following list of updates has been categorized based on the installer required. The Client installer is required for Prepar3D v4.1, however the Content, Scenery, and SDK installers are optional. You must first have Prepar3D v4 installed to utilize the Client only installer. To install the Prepar3D v4.1 Client, you must first uninstall the Prepar3D v4.0 Client via Programs and Features in Windows Control Panel. The Prepar3D v4.1 Client update will require you to reactivate your product, however if you have an internet connection it will be automatic. For more information please view the Prepar3D v4 Download/Installation Instructions from the Prepar3D.comDownloads page.
      Prepar3D Client
      General Platform Updates
      New Features
      • Virtual Reality (VR) is now available in any view and has its own dedicated menu
      • Added interactive mouse pointer in VR
      • Added support for 4k Virtual Cockpit (VC) textures
      • Custom icons can be placed and rendered in the world. Their location can also be viewed in the 2D map.
      • Health points for the ownship are now displayed in InfoGen text
      • Added "HideMouseLookCrosshair" config option to disable the cross icon when using mouse look
      • Notification text can now be added using the "CustomNoticeText" config option
      • Added support for cockpit rain effects. Added effect to default vehicles (requires Content installer)
      New Features (Professional Plus Only)
      • High-Level Architecture (HLA) network interface is implemented (experimental - work in progress)
      Fixes and Improvements
      • Fixed an issue where turn rate was incorrect for large ships
      • Fixed an issue that prevented legacy Prepar3D v1 SimConnect apps from properly connecting
      • Fixed various z-ordering issues with primitive objects
      • Fixed issue with SimConnect port values being written incorrectly to the registry
      • Fixed intermittent issue with autopilot glide slope
      • Barometric pressure units now display correctly in the Custom Weather screen
      • Added scenario favorites button back to the Load Scenario screen
      • Updated select camera control descriptions to be more consistent
      • Fixed issue where weather data for animated scenery objects was invalid after a vehicle change
      • Fixed rotation issues with certain lights and effects
      • Fixed crash that could occur when calling the FlightPlanDeleteWaypoint function within a gauge
      • Updated the default Max VC Texture Size config entry to 4096
      • Fixed bug where user vehicle would still move to new location after hitting cancel from the Scenario Edit screen
      • Fixed shader support for pre-lit materials without textures
      • Fixed crash that could occur when zooming the GPS map
      • Duplicated panels are now saved into scenario .fxml files
      • Fixed crash that could occur when attempting to change airports at certain locations
      • Fixed crash that could occur when reading in invalid autogen data
      • Panels with pixel_size value set in config now correctly save their position in fxml files
      • Fixed bug where changing the time in small increments in the Startup Screen did not update the simulation
      • Fixed bug where quickly hitting enter after typing an entry in the Airport Select screen would not change the user's location
      • Fixed bug where structured scenarios would load incorrectly at the startup screen when set to default
      • Fixed bug where unlimited frame rate value was written out differently in saved profiles compared to Prepar3d.cfg settings
      • The ATC window now longer processes key commands when key modifiers (Shift, Ctrl, Alt) are held down
      • The ATC window now processes key commands when undocked and not focused
      • Updated Learning Center file encodings to support Unicode characters
      • Autogen polyline buildings now respect the autogen building density slider value
      • Fixed issue that prevented light rotation key commands from controlling attached landing lights
      • Fixed issue that prevented HDR lighting values from syncing correctly in VR
      • Fixed several cases where attached effect rotation values would not update correctly
      • Previous camera settings are now restored correctly when leaving VR
      • Fixed edge cases where full screen would not black out the main view at the Startup Screen
      • Fixed issue preventing full screen resolution from being set correctly in the Startup Screen
      • Fixed issue that prevented vehicles from positioning correctly on platforms when loading a scenario
      • Updated VR social screen to show both stereo and single views
      • Fixed erroneous ordering error that would display when opening Scenery Library with certain add-on sceneries installed
      • VR can be disabled with the "LoadVirtualReality" Prepar3D.cfg option
      • "Reload User Object" key command now additionally flushes and reloads textures
      • Fixed issue that would cause ribbon visual paths to stop drawing after a short period of time
      • SpeedTree models now draw correctly in Radar and GData sensor modes
      • Fixed view change issues when using the view change hot key in a view group
      • VR can be enabled at startup with the "EnableVirtualRealityOnStartup" Prepar3D.cfg option
      • Improved detection of VR headsets with more robust error reporting
      Fixes and Improvements (Professional Plus Only)
      • Fixed bug where weapon loadouts would load incorrectly after a reset if the loadout title contained a comma
      • Distributed Interactive Simulation (DIS) heartbeat now more configurable
      • Attached DIS entities now correctly handled
      Multiplayer Updates
      New Features
      • Added radio frequency support and direct voice chat through multiplayer Chat Window
      Fixes and Improvements
      • Improved panel state management when entering multiplayer
      SimDirector Updates
      New Features
      • Scaleform Objects can now be placed and rendered within the VC
      • The starting waypoint can now be set for AI Objects
      Fixes and Improvements
      • Gizmo buttons now toggle based on gizmo state
      • Fixed slow down when entering the visualization
      • BGL can now be exported again through SimDirector
      • Fixed bug where translation gizmo would not be selectable if partially off screen
      • Fixed crash that could occur when clicking panels while recording a Virtual Instructor (VI) session
      • The position of copied objects is now slightly offset from the original
      • Camera Objects can now be referenced by View Change Actions
      • Fixed issue that prevented object rotation values from exporting to BGL
      • Fixed issue where the xml file name would be truncated after the first period when clicking "Save as"
      • Camera name validation errors now link to the correct property
      • Fixed bug where navigation visuals would stay enabled in SimDirector if changed in core Prepar3D
      • Fixed issue preventing RPN scripts from working correctly with Script Triggers
      Prepar3D Content
      New Features
      • Added rain effect to cockpit glass in default vehicles
      • F-16A and F-16AM now feature a Helmet Mounted Display (HMD) reticle, which can also be viewed in VR
      Fixes and Improvements
      • Added configurable max_turn_rate for boat SimObjects
      • Updated default scenario flt files to support Unicode characters
      • Fixed flashing that would occur with the Fury 1500 when in Black Hot IR mode
      • Fixed missing cockpit textures in the F-16
      • Removed incompatible AI models
      Prepar3D Scenery
      Fixes and Improvements
      • Fixed missing textures in St. Louis Adams Mark
      • Removed invisible objects that could cause vehicle to crash at KBWI
      Prepar3D SDK
      New Features
      • Weather PDK now supports all functions available in SimConnect
      • Added CustomIcons sample showcasing new custom icon capabilities
      • Added additional Window PDK functions supporting 3D window positioning
      • Added PDK Menu service
      Fixes and Improvements
      • Updated various documentation including Panel API, user selectable vehicles, texture types, and add-on scenery
      • Expanded IsSelectableVehicle support for use in fltsim cfg sections
      • Fixed issue where Weather METAR functions in SimConnect and PDK would return different formats
      • Fixed issue where the bounding box and radius override values were not being written out correctly by the 3dsMax exporter
      • Fixed issue that prevented Optimize Parts from working with complex vehicle models
      • Updated targeting pod sample showing controllable camera functionality
      • Removed Learning Management System (LMS) SDK sample and associated documentation
      • Added Managed Scenario Controller SDK sample. This can be used with LMS integration among other applications.
      • Fixed SimConnect_Text issue with displaying extended ASCII characters
      • Fixed issue with 3dsMax plugins not exporting OverrideRadius and OverrideBoundingBox values
      • Added key event token and event id lookup functions to PDK
      • Fixed crash and added warning message when attempting to create VC textures with filenames greater than 16 characters
      • Fixed crash in managed SimConnect applications on shut down. These applications will need to be recompiled for this change to take effect.
      • Fixed several issues with the EnvironmentForceManager
      Hauptsächlich im Dienster der VR Performance..... hust
      Greets

      Michaellowl

      Former Scenery Designer ADG (LOWG 2009) and smaller Austrian Airfields (LOLU, etc.);
      PAYA (Member in the Team of Holger Sandmans AVSIM awarded Glacier Bay scenery)
      Former Pilot (PPL; CPL/IFR; //ATPL student) luvin low and slow :D